Skip to content
Kalighat Park, Stall No. 13, Kolkata 700026 pdutta1231@gmail.com +91 82740 66348
Geyser & Microwave Service — geyser and microwave repair in Kolkata

Geyser Giving a Shock or Tripping the MCB? What to Do Now

A tingle from the tap or an MCB that trips when the geyser switches on almost always means the element is leaking current to earth. What to do, and why resetting is wrong.

Geyser-service-1

Quick answer: switch the geyser off at the mains and stop using it. A shock from a tap, or an MCB that trips whenever the geyser switches on, almost always means the heating element has failed and is leaking current to earth. In a wet bathroom that is a serious hazard, not a fault to live with for a few weeks.

Send a photo of the geyser and its model sticker. The price is agreed before any work starts.

What to do right now

  1. Switch the geyser off at the MCB or isolator, not just the wall switch.
  2. Do not use the shower or hot tap until it has been checked.
  3. Tell everyone in the house, especially children and elderly family members.
  4. Do not keep resetting the MCB. It is tripping for a reason.
  5. Call a technician and describe the symptom precisely. It tells them what to test and what to bring.

Safety first: do not touch the geyser, its switch or metal taps with wet hands or bare feet while the fault is live. Switch off at the MCB with dry hands. Switching the geyser off just before bathing is not a fix: the element is still faulty, and the fault can get worse.

What is actually happening

The heating element sits inside the tank, directly in the water. It is a sealed metal tube with a live conductor inside, insulated from the outer sheath.

When that insulation breaks down through age, scale or overheating, current escapes into the water and the tank body. From there it reaches the pipework, and then whatever the pipework connects to: the tap, the shower fitting, the metal parts you touch with wet hands.

If the earthing is sound, the leaking current goes to earth and the MCB or RCCB trips. That trip is the protection working correctly. If earthing is poor or missing, the current looks for another path, and that path can be a person.

The dangerous misunderstanding

A tripping MCB is often treated as an annoyance to be reset. In this case it is the opposite: the MCB is doing exactly what it exists to do, and resetting it again and again overrides your last line of protection.

Equally, a “small tingle” is not a mild version of a safe situation. It means current is already reaching a surface you touch. Whether it stays small depends on conditions, such as how wet your hands are and what you are standing on, that change every time.

What a technician will check

  • Insulation resistance of the element. This confirms whether it is leaking to earth. It is a measurement, not a guess.
  • The earthing connection at the geyser and whether it is properly bonded. Missing or corroded earthing is common in older Kolkata buildings and turns a fault into a hazard.
  • The thermal cut-out and thermostat, since overheating is often what damaged the element.
  • The connections and terminal cover for moisture or scorching.
  • Whether water has reached the electrical compartment. A leaking element gasket can cause exactly this.

Why it usually is not “just the switch”

People often assume a faulty switch or wiring. It happens, but a fault that appears specifically when the geyser is on, and that produces a tingle at a water outlet, points at the element far more often. The water itself is completing the circuit.

When to call a technician: straight away, and leave the geyser off until then. When you call or WhatsApp, say that it is giving a shock or tripping the MCB, so the technician comes ready to test the element and the earthing. You can book a geyser repair visit in Kolkata, and we confirm a visit time when you book.

Can this be repaired?

Yes, and usually straightforwardly, on all the common brands including Havells and Crompton. The failed element is replaced, the earthing is corrected if needed, and the unit is tested before it goes back into use. What matters is that the earthing is verified as part of the job. Replacing the element without asking why the current had a path to the tap only fixes half the problem.

If the tank itself has corroded and water has been reaching the electrical parts, that is a different conversation, and the unit may need replacing. Either way, the price is agreed before any work starts. We are an independent service, not connected to any manufacturer.

Preventing it

Scale is the usual root cause: it makes the element run hotter than designed, and heat degrades the insulation. An annual descale and service makes an element failure like this much less likely. Ask for the earthing to be checked at the same visit, particularly in older buildings. For the other warning signs worth acting on, see geyser safety warning signs.

Frequently asked questions

Why does my geyser trip the MCB?

Almost always because the heating element has failed and is leaking current to earth. The MCB or RCCB tripping is the protection working correctly. Resetting it again and again overrides your last line of defence, so leave the geyser off and have the element and earthing tested.

Why do I get a shock from the tap when the geyser is on?

Current is escaping from a failed element into the water and the tank body, then reaching the pipework and the tap. It usually means the earthing is also poor, otherwise the MCB or RCCB would trip. Switch the geyser off at the mains and stop using the hot water immediately.

Is a small tingle from the tap safe?

No. A tingle means current is already reaching a surface you touch. Whether it stays small depends on how wet your hands are and what you are standing on, which changes every time. Treat any tingle as a reason to switch off at the mains and call a technician.

Can I keep using the geyser if I switch it off before bathing?

It lowers the risk while the element is off, but it is not a fix. The element is still faulty, the MCB will keep tripping when it heats, and the fault can get worse. Leave the geyser off at the mains and have the element and earthing tested.

Can a geyser that gives a shock be repaired?

Yes, usually. The failed element is replaced, the earthing is checked and corrected if needed, and the unit is tested before it goes back into use. The earthing check matters as much as the new element. If the tank has corroded and water has reached the electrical parts, replacement may be the safer option.

Published by

Geyser & Microwave Service — an independent geyser and microwave repair service working in homes across Kolkata. Questions about this guide, or a fault that is not covered here? Get in touch.

Book a geyser or microwave repair

Tell us the appliance, brand and the problem, and we will arrange a technician visit in your area of Kolkata.

+91 82740 66348

More repair guides