Skip to content
Kalighat Park, Stall No. 13, Kolkata 700026 pdutta1231@gmail.com +91 82740 66348
Geyser & Microwave Service — geyser and microwave repair in Kolkata

Service Charges – How We Quote

How we price geyser repair, servicing, installation and microwave repair – what affects the cost, and why the full price is agreed before any work starts.

  • Independent technician, all major brands
  • Price agreed before any work starts
  • Repairs at your home across Kolkata

How to get a quote

Most quotes start with a photo on WhatsApp. It takes a minute.

  1. Send a photoWhatsApp a photo of the appliance and its model sticker.
  2. Tell us the faultFor example: a geyser with no hot water, or a microwave that is not heating.
  3. Quote or visitWe reply with an estimate, or book a technician visit to diagnose it.
  4. Price agreed firstThe full price is agreed with you before any work starts.

We do not publish fixed prices, because the cost of a repair depends on what has actually failed – and that is only known once the appliance has been checked. What we can tell you up front is how our pricing works: there is a visit charge for the inspection, parts and labour are quoted once the fault is identified, and the full price is agreed with you before any work starts. There are no hidden extras.

For a quicker idea of the cost, WhatsApp a photo of the appliance and its model sticker with a line about the fault. That is often enough to give you an estimate, or to book a visit with the right parts on board.

Send a photo of the geyser and its model sticker. The price is agreed before any work starts.

How we price a job

The visit charge

There is a visit charge for the technician to come to your home, inspect the appliance and find the fault. We confirm it when you book, so you know it before anyone arrives.

The repair quote

Once the fault is found, the technician tells you which part has failed, what the part costs and what the labour comes to. Where a part is available both as an original manufacturer part and as a compatible one, we tell you which we are quoting. Both are legitimate; the price differs, and the choice is yours.

Agreeing the price

Nothing is done until you have agreed the full price. If you decide not to go ahead, you pay only the visit charge.

If something else turns up

Occasionally a second problem only shows once the appliance is open – a corroded fitting behind a leaking geyser valve, for instance. If that happens, we stop, show you, and quote it before doing anything more. You are never asked to pay for work you did not agree to. The part we remove is shown to you and handed back.

Why we quote after seeing the fault

The same symptom can have very different causes. A geyser with no hot water might need a tripped cut-out checked and reset, a new thermostat, or a new heating element. A microwave that runs but does not heat might have a failed diode, capacitor or magnetron. Those repairs cost very different amounts, and nobody can tell which one it is over the phone.

A firm price given before anyone has seen the appliance is either a guess or a starting figure that grows once the job begins. We would rather check first and give you a price we stick to. A photo and the model number narrow it down; the inspection confirms it.

Getting the most useful estimate

The more we can see, the closer the estimate. When you message us, include:

  • A photo of the whole appliance and a clear photo of its model sticker or rating plate.
  • What it is doing – for example, no hot water at all, or warm but never hot.
  • Any error code on the display, or a short video if it is making a noise.
  • Its rough age, and your area.

What affects the cost

Geyser repair

  • Which part has failed – a washer or connection, a thermostat or cut-out, a heating element or a valve.
  • Original or compatible part – both are legitimate; the price differs.
  • Capacity and position – a large tank fixed high above a door takes longer to work on.
  • How long the fault was left – a leak left for months can corrode the fittings around it.
  • Whether the tank is sound – a tank leaking from the body is a replacement, not a repair.

More on geyser repair in Kolkata and geyser repair cost in Kolkata. Asking about a particular brand? See AO Smith geyser service charges explained.

Geyser servicing and descaling

  • How heavily scaled the geyser is – hard or borewell water and long gaps between services mean more work.
  • How many geysers are serviced in the same visit.
  • Size and access – capacity, mounting height and how tight the space is.
  • Worn parts found during the service – an anode rod, gasket or valve is quoted separately before fitting.

More on geyser servicing and descaling.

Geyser installation and uninstallation

  • Like-for-like swap or new position – reusing existing brackets and pipe points is simpler.
  • Wall type and height – brick, tiled or concrete, and how high the geyser goes.
  • Pipework and valves – whether new connection pipes or a new safety valve are needed.
  • Electrical point – whether a suitable socket, MCB and earth are already in place.
  • Removing an old geyser first.

More on geyser installation in Kolkata and what’s included in a geyser installation.

Microwave repair

  • Which part has failed – an interlock switch, fuse or turntable coupler is a much smaller job than a magnetron, high-voltage capacitor or control board.
  • Solo, grill or convection – convection models have more parts and more complex boards.
  • Parts for your model – older or discontinued models may need parts sourced.
  • On-site or bench repair – most faults are fixed at home; control board repairs need bench work.
  • Built-in ovens – an oven fitted into kitchen cabinets takes longer to take out and refit.

More on microwave repair in Kolkata and what affects microwave repair cost.

When a repair is not worth it

Sometimes the straight answer is that a repair does not make financial sense – a geyser tank leaking from the body, a microwave cavity rusted through, or a major part on an old entry-level oven. In that case we tell you, rather than quote for work that will not last. See how long a geyser lasts and microwave repair or replacement.

Still under warranty?

If your geyser or microwave is still under the manufacturer’s warranty, contact the brand first. In-warranty repairs are handled under the brand’s terms, and work by an independent repairer can affect that cover. We are an independent service, not a brand or manufacturer’s service centre, and we are not affiliated with any manufacturer.

Frequently Asked Questions

Do you charge for a visit?

Yes. There is a visit charge for the technician to come to your home, inspect the appliance and find the fault. The amount is confirmed when you book, so you know it before anyone arrives. Parts and labour for the repair are quoted separately once the fault is identified, and agreed with you before any work starts.

Can you tell me the repair price over the phone?

We can give you an estimate if you WhatsApp a photo of the appliance and its model sticker with a description of the fault. The final price depends on what the technician finds, because one symptom can have several causes with very different costs. Whatever the fault, the full price is agreed before any work starts.

Are there any hidden charges?

No. You pay the visit charge, which is confirmed when you book, plus the parts and labour you have agreed to. If the technician finds a second problem once the appliance is open, we stop and quote it before doing anything more. Nothing is added to the bill that you have not agreed beforehand.

What happens if I decide not to go ahead with the repair?

You pay only the visit charge for the inspection. The technician tells you what has failed and what the repair would cost, and the decision is yours. If a repair does not make financial sense, for example a geyser tank leaking from the body, we say so rather than quoting for work that will not last.

What are AO Smith geyser service charges in Kolkata?

We do not publish fixed prices for any brand. For an AO Smith geyser, the cost depends on whether it needs servicing or a repair, which part has failed, and the size and position of the unit. If it is under warranty, contact AO Smith first. Otherwise, WhatsApp us a photo and the model sticker for an estimate.

Do original parts cost more than compatible parts?

Usually, yes. Where a part is available both as an original manufacturer part and as a compatible equivalent, we tell you which one we are quoting and the difference, and you choose. Both are legitimate. For some older models only one option may be available, and we tell you that before you agree.

Request a call back

Leave your number and we will call you

Tell us the appliance, the brand and what it is doing. We call back, explain the likely fault and agree a visit time. The price is agreed before any work starts.

Prefer to talk now?

+91 82740 66348

    We only use your number to call you back about this request.