Skip to content
Kalighat Park, Stall No. 13, Kolkata 700026 pdutta1231@gmail.com +91 82740 66348
Geyser & Microwave Service — geyser and microwave repair in Kolkata

Geyser Servicing & Descaling in Kolkata

Doorstep geyser servicing and descaling across Kolkata – the element, tank, anode rod, thermostat and safety valve checked before winter, with the price agreed first.

  • Independent technician, all major brands
  • Price agreed before any work starts
  • Repairs at your home across Kolkata

How to get a quote

Most quotes start with a photo on WhatsApp. It takes a minute.

  1. Send a photoWhatsApp a photo of the geyser and its model sticker.
  2. Tell us the faultFor example: no hot water, leaking, tripping the MCB or making a noise.
  3. Quote or visitWe reply with an estimate, or book a technician visit to diagnose it.
  4. Price agreed firstThe full price is agreed with you before any work starts.

A geyser service descales the heating element, flushes sediment out of the tank, tests the thermostat, thermal cut-out and safety valve, and checks the anode rod that stops the tank corroding. For most Kolkata homes once a year is right, ideally in October or early November before daily winter use begins. In hard-water areas, or with heavy daily use, every eight to ten months is more realistic.

We service geysers at your home across Kolkata, for all the common brands. We are an independent service, not a brand or manufacturer’s service centre, and the price is agreed before any work starts.

Why scale builds up in a geyser

Hard water carries dissolved calcium and magnesium salts. When the water is heated, some of those salts come out of solution and settle as scale – a hard crust on the heating element and a layer of sediment on the tank floor.

Scale insulates the element, so it has to run hotter to heat the same water. It takes longer, uses more electricity and burns out sooner. Sediment on the tank floor takes up space, so a 25-litre tank can start delivering much less hot water, and it traps heat against the tank, which speeds up corrosion.

How fast this happens depends on your water. Buildings on borewell or deep tubewell water often see heavier scale and iron deposits than those on treated municipal supply. A simple clue: if your taps and shower head collect a white crust, the element inside your geyser is collecting the same.

What a geyser service includes

  1. Safe isolation and draining – power off at the MCB, water supply closed, and the tank drained once it has cooled.
  2. Descaling the heating element – the element is taken out where the design allows and the scale removed. If it is badly scaled, cracked or burnt, we show you and quote a replacement before fitting one.
  3. Flushing sediment – loose scale and silt are flushed from the tank floor to restore capacity.
  4. Checking the anode rod – this sacrificial rod, usually magnesium, corrodes on purpose so the tank does not. On many models it sits on the same flange as the element. Once it is worn down to a thin core, corrosion moves to the tank itself, so a worn rod is worth replacing.
  5. Testing the element – for correct resistance and for leakage to earth, which is what causes shocks and MCB trips.
  6. Testing the thermostat and thermal cut-out – checking the thermostat switches off at the right temperature and the cut-out works as the last line of defence.
  7. Checking the safety valve – the pressure relief or multi-function valve on the inlet must not be stuck, blocked or dripping constantly.
  8. Connections, gaskets and earthing – checking for seepage, perished gaskets and a sound earth connection.
  9. Refill and test run – the tank is refilled before the power goes back on, then heated through a full cycle while the joints are checked for leaks.

Replacement parts – an element, anode rod, thermostat, gasket or valve – are not part of the service itself. If one is needed, we tell you what and why, and quote it before fitting.

How often should a geyser be serviced?

  • Most Kolkata homes: once a year, before winter. Demand peaks from November to February, and the first cold week is when neglected geysers fail.
  • Hard water, borewell supply or a large family: every eight to ten months.
  • Rarely used geysers (a guest bathroom, for example): still roughly once a year, because the anode rod keeps corroding and seals dry out even when the unit sits idle.
  • Geysers still under warranty: follow the brand’s service schedule through its own service centre, so the warranty is not affected.

Read more in how often should a geyser be serviced and geyser maintenance before winter in Kolkata.

Signs your geyser is due a service

  • Water takes noticeably longer to heat than it used to.
  • You run out of hot water sooner – the usable capacity has shrunk.
  • Crackling, popping or rumbling while it heats.
  • Water that is only lukewarm, or scalding with no useful middle setting.
  • Discoloured hot water, or a smell like rotten eggs from the hot tap.
  • The safety valve drips when the geyser is heating.
  • The geyser is more than two years old and has never been serviced.

Between services

  • Use a moderate thermostat setting. Running flat out speeds up scaling without giving you much more usable hot water – you simply mix in more cold at the tap.
  • Switch it off when it is not needed. Keeping a full tank hot all day wastes electricity on a geyser used twice.
  • Run a test cycle in late October. Switch the geyser on while you are at home, and watch and listen for any of the signs above before the cold arrives.

Safety first: a shock or tingle from a tap, an MCB that trips when the geyser switches on, or a burning smell is not a servicing job to put off until next month. Switch the geyser off at the mains, stop using it and call a technician.

Servicing or repair?

A service keeps a working geyser working. If yours has stopped heating altogether, is leaking, or is tripping the power, you need a repair visit first – the technician finds the fault, and a service can be done at the same time. See our geyser repair service.

Servicing also tells you how long the geyser has left. A tank with a fully consumed anode rod and rust in the sediment is near the end of its life, and it is better to know that in October than in the middle of January. See how long a geyser lasts.

Servicing several geysers

Many Kolkata flats have two or three bathrooms, each with its own geyser, and they all go into winter in the same state. Servicing them in one visit is simpler than separate calls. If you look after several flats or a building, ask about servicing the units together.

Getting a quote for servicing

The cost depends on how many geysers you have, their capacity and how easy they are to reach, how heavily they are scaled, and whether any parts turn out to be worn. WhatsApp a photo of each geyser and its model sticker, with its rough age and when it was last serviced. The full price is agreed before any work starts, with no hidden extras. Read how we quote.

We service all the common geyser brands – see the brands we work on. Fitting a new geyser instead? See geyser installation in Kolkata.

Frequently Asked Questions

How often should a geyser be serviced in Kolkata?

Once a year suits most homes, ideally in October or early November before daily winter use begins. If your building uses borewell water, your water is hard, or the geyser runs heavily every day, every eight to ten months is more realistic. A geyser still under warranty should follow the brand's own service schedule.

What is included in a geyser service?

Draining the tank, descaling the heating element, flushing sediment, checking the anode rod, testing the element, thermostat and thermal cut-out, checking the safety valve, inspecting connections, gaskets and earthing, then refilling and running a full heating cycle. Any replacement part, such as an element or anode rod, is quoted separately before it is fitted.

How do I know if my geyser needs descaling?

The usual signs are water taking longer to heat, running out of hot water sooner, and crackling or rumbling while the geyser heats. A white crust on your taps and shower head is a good clue that the element is scaling up too. If the geyser has never been serviced and is more than two years old, it is due.

Does servicing a geyser reduce the electricity bill?

It can. Scale insulates the heating element, so a scaled geyser runs longer to heat the same amount of water. Descaling lets the heat reach the water properly again. Setting the thermostat to a moderate temperature and switching the geyser off when it is not needed also make a noticeable difference.

How much does geyser servicing cost?

It depends on how many geysers you have, their size and position, how heavily they are scaled, and whether any parts are worn. There is a visit charge, the service is quoted before work starts, and any parts are agreed separately. WhatsApp a photo of each geyser and its model sticker for a quick estimate.

Should a geyser under warranty be serviced by the brand?

Yes. While your geyser is under the manufacturer's warranty, use the brand's own service centre, because work by an independent technician can affect that cover. Once the warranty has ended, an independent service is a sensible choice. We are independent and not linked to any manufacturer, and we service all the common brands.

Request a call back

Leave your number and we will call you

Tell us the appliance, the brand and what it is doing. We call back, explain the likely fault and agree a visit time. The price is agreed before any work starts.

Prefer to talk now?

+91 82740 66348

    We only use your number to call you back about this request.