Skip to content
Kalighat Park, Stall No. 13, Kolkata 700026 pdutta1231@gmail.com +91 82740 66348
Geyser & Microwave Service — geyser and microwave repair in Kolkata

Instant vs Storage Geyser for Kolkata Flats

Instant or storage? How to choose for a Kolkata flat, based on what the hot water is for, winter mornings, wiring, water pressure and wall space.

geyser repair near me

Quick answer: for a bathroom where people bathe or shower, a storage geyser (usually 10 to 25 litres) is the practical choice. An instant geyser (typically 1 to 6 litres) suits a kitchen sink, a wash basin or one quick bucket. In a Kolkata flat, decide by what the hot water is for, how many people bathe one after another on winter mornings, the wiring at the point, and the water pressure in your building.

Send a photo of the geyser and its model sticker. The price is agreed before any work starts.

What “instant” means in Indian shops

Most geysers sold in India as “instant” are not truly tankless. They are small tanks, usually 1 to 6 litres, with a more powerful element so the water heats quickly. Instant models commonly use a 3 kW element, and some go higher, while 10 to 25 litre storage models typically use 2 kW.

That gives a simple trade-off. An instant unit heats a small amount of water fast. A storage unit takes longer to heat up but then holds enough hot water for a full bath or shower, and more.

True tankless heaters, which heat water only as it flows, do exist. Venus, for example, lists single-phase and three-phase tankless models, and AO Smith lists a tankless range. They need far more power than a small instant geyser, and three-phase models need a three-phase supply. They are uncommon in flats, and the electrical point should be checked before you buy one.

Side by side

Instant (1–6 L) Storage (10–25 L)
Best for Kitchen sink, wash basin, one quick bucket Bathrooms, showers, several baths in a row
Hot water Small amount, quickly A full tank once heated
Electrical load Higher wattage, so the point must suit it Lower wattage, runs for longer
Space and weight Compact and light Needs wall space and a strong fixing
Servicing Descaling of a small element Descaling, sediment flush, anode rod check

What matters in a Kolkata flat

Who uses it, and when

Kolkata winters are mild, but from November to February most households want hot water at the same time: early morning, before office and school. If two or three people bathe one after another, an instant unit will not keep up, and even a small storage tank can run short. Think about the busiest half hour, not the average day.

The wiring at the point

An instant geyser draws a lot of current while it runs. In newer flats the bathroom or kitchen point is usually wired for it. In older buildings it may not be, and a light-duty socket or thin cable will heat up. Both types need a sound earth connection. If you are not sure what your point can take, have it checked when the geyser is installed.

Water pressure

Many flats are fed from an overhead tank, so pressure depends on the height difference. Top-floor flats often get weak flow, which no geyser can fix. In high-rises with pressure pumps, check the pressure rating on the geyser against your building’s supply. Several mainstream storage models are rated up to 8 bar, but ratings vary, so check the model you are buying.

Wall space

Flat bathrooms are often small. A 25-litre vertical tank needs a clear, solid stretch of wall. Horizontal and slim models exist for tight spaces and lofts. An instant unit fits almost anywhere, which is one reason it gets chosen for bathrooms it cannot really serve.

Hard water

Parts of Kolkata have hard water, and both types scale up. The small, hot-running element in an instant unit can lose performance to scale quickly. A storage tank collects sediment at the bottom and relies on its anode rod to resist corrosion. Either way, regular servicing is what keeps them working. Our guide to geyser maintenance before winter in Kolkata covers the local factors.

Running cost depends on habits

People often assume an instant geyser is cheaper to run because it only heats what you use. A storage geyser does lose some heat while it sits, which is what the star rating on storage models reflects. But how you use it matters more than the type:

  • A storage geyser left on all day at maximum temperature wastes far more than one switched on before the morning rush.
  • Setting the thermostat only as high as you need cuts both heat loss and scale.
  • An instant unit run for long periods to fill bucket after bucket is no longer saving anything.

Combinations that work well

  • Storage in the bathroom, instant in the kitchen. The most common sensible setup.
  • Two bathrooms used at the same time. One storage geyser each, sized for the people using that bathroom.
  • One person, bucket baths, small bathroom. A small storage tank is usually more comfortable than an instant unit, but an instant model can work if expectations are modest.

To size a storage tank, see what size geyser you need. If you are looking at specific models, our Venus geyser buyer’s guide compares a range of instant and storage units.

Safety first: whichever type you choose, it needs an earth connection and a supply rated for its load. Never run a geyser from an extension board. If a new geyser trips the MCB or you feel a tingle from the tap, switch off at the mains and have it checked.

Brands make both

Most major brands sell both types. Venus and AO Smith, for example, have instant and storage ranges. The right choice comes from your bathroom and your mornings, not the brand. We are an independent service and fit and repair both types across most brands.

When to call a technician: before buying, if you are unsure whether the point is wired and earthed for the geyser you want, or to fit the new unit. Details are on our geyser installation in Kolkata page. A photo of the wall and the existing pipe and power points gives a quick first view.

Frequently asked questions

Is an instant geyser good for a bathroom?

Only for light use. Most instant geysers sold in India hold 1 to 6 litres and suit a wash basin or one quick bucket. For showers, or for several people bathing one after another on a winter morning, a storage geyser of 10 to 25 litres is the practical choice.

Which geyser is better for a Kolkata flat, instant or storage?

Usually a storage geyser for the bathroom and an instant geyser for the kitchen sink. The deciding factors are how many people need hot water in the same half hour, whether the electrical point suits the load, the water pressure in your building and how much wall space you have.

Does an instant geyser use more electricity than a storage geyser?

Not necessarily. An instant geyser has a higher wattage element but runs for short periods. A storage geyser uses less power while heating but loses some heat as it sits. Habits matter most: switching a storage geyser on only when needed and setting a sensible temperature makes a bigger difference than the type.

Does an instant geyser need special wiring?

It needs a point rated for its load and a sound earth connection. Instant models commonly use a 3 kW element, so a light-duty socket or thin cable, which is common in older buildings, can overheat. Never run any geyser from an extension board. If you are unsure, have the point checked during installation.

Which type of geyser is better for hard water?

Neither avoids scale. The small, hot-running element in an instant geyser can lose performance to scale quickly, while a storage tank collects sediment and depends on its anode rod to resist corrosion. In hard water areas, regular descaling and servicing matters more than the type you choose.

Published by

Geyser & Microwave Service — an independent geyser and microwave repair service working in homes across Kolkata. Questions about this guide, or a fault that is not covered here? Get in touch.

Book a geyser or microwave repair

Tell us the appliance, brand and the problem, and we will arrange a technician visit in your area of Kolkata.

+91 82740 66348

More repair guides