Skip to content
Kalighat Park, Stall No. 13, Kolkata 700026 pdutta1231@gmail.com +91 82740 66348
Geyser & Microwave Service — geyser and microwave repair in Kolkata

Remson Geyser Repair & Service in Kolkata

Independent repair and servicing for Remson geysers at your home in Kolkata, with a straight answer on whether repair or replacement makes more sense.

  • Independent technician, all major brands
  • Price agreed before any work starts
  • Repairs at your home across Kolkata

How to get a quote

Most quotes start with a photo on WhatsApp. It takes a minute.

  1. Send a photoWhatsApp a photo of the geyser and its model sticker.
  2. Tell us the faultFor example: no hot water, leaking, tripping the MCB or making a noise.
  3. Quote or visitWe reply with an estimate, or book a technician visit to diagnose it.
  4. Price agreed firstThe full price is agreed with you before any work starts.

Yes, we service and repair Remson geysers at home across Kolkata. Remson is less common here than the big national brands, but inside, a Remson storage geyser works like any other: an element, a thermostat, a thermal cut-out and a safety valve. Diagnosis is straightforward. The one honest difference is that a brand-specific part sometimes has to be ordered rather than coming out of the technician’s bag, and we tell you if that applies before you commit.

Remson geysers we see in Kolkata homes

Remson is a smaller Indian brand, sold less widely than the big names, which mainly matters when it comes to parts. Most Remson geysers are storage models in the usual 10, 15 and 25 litre bathroom sizes. Retail listings show names such as Prime, Aqua Prime and glass-lined (GL) models. There are also small 1 to 3 litre instant heaters for kitchens.

With an older Remson, the first question at a visit is whether the tank itself is still sound. If it is, a repair makes sense. If it is weeping from the body, it does not.

Common Remson geyser faults

These are typical of a storage geyser that has done several winters:

  • No hot water. A burnt-out element, or a thermal cut-out that has tripped and will not reset.
  • Water warm but not hot. A thermostat that has drifted, or scale on the element. In Kolkata buildings that draw borewell water, scale builds up fast on older elements.
  • Indicator lamp not lighting. A failed lamp, a loose terminal, or no power reaching the geyser. Check the switch and MCB before you call.
  • Dripping from the valve or connections. Worn washers or a tired pressure relief valve, both simple fixes.
  • Rusty or discoloured hot water. On an older tank this can be an early sign of internal corrosion, especially if the anode has never been changed. It is worth having checked before it becomes a leak.
  • Shock from the tap, or the MCB trips. Switch off at the mains and stop using it. On older geysers, a failed element or perished wiring is the usual cause.

Parts we usually replace

Elements, thermostats, thermal cut-outs, pressure relief valves and washers are generic enough that we can usually fit a suitable part to a Remson on the first visit. Where a part is specific to Remson, such as a particular element flange, an anode rod of an unusual size or an indicator assembly, it may need ordering. In that case it is fitted on a second visit, and we confirm availability before you agree to the repair. If a part is no longer obtainable for an old model, we will say so plainly rather than leave you waiting.

Servicing, installation and replacement

An older Remson that still works will last longer with a yearly geyser service. That means a descale and flush, an anode rod check, and a test of the thermostat, cut-out and valve, ideally in October before winter. If the tank is corroded, or parts are no longer available, replacement is the better spend. Our geyser installation service covers removing the old Remson and fitting the new geyser with its valve, wiring and earthing checked. For a sense of when a geyser is near the end, see how long a geyser lasts.

What affects the cost

  • Whether a generic part fits or a Remson-specific part has to be ordered.
  • The age and condition of the tank, which decides whether repair is worth it at all.
  • The tank size, and whether a descale is needed too.
  • Access to the geyser where it is mounted.

There is a visit charge for the inspection. Parts and labour are quoted once the fault is identified, and the full price is agreed before any work starts, with no hidden extras. Read how we quote for the detail.

Independent technician

We are an independent repair business and have no connection with Remson. If your geyser is still under warranty, use the contact details on your warranty card or invoice. Out of warranty, or simply want someone local to look at it? Call or WhatsApp us.

The service areas page shows where we visit.

Frequently Asked Questions

Do you service Remson geysers in Kolkata?

Yes. We repair and service Remson storage and instant geysers at homes across our Kolkata service area. A Remson uses the same core parts as other geysers, so diagnosis is straightforward, and most common faults are fixed in one visit. Send a WhatsApp photo of the geyser and its model sticker for a quick estimate, or call to book a visit.

How do I contact Remson customer care?

We are not Remson and do not publish brand helpline numbers. If your geyser is still under warranty, use the contact details printed on your warranty card or purchase invoice, because outside repairs can affect that cover. For an out-of-warranty Remson, or if you want a faster local visit, you can call or WhatsApp us directly.

Are spare parts available for Remson geysers?

The common parts usually are. Elements, thermostats, thermal cut-outs, valves and washers are generic enough to fit most Remson storage geysers on the first visit. Some brand-specific parts, such as certain element flanges or anode rods, may need ordering and fitting on a second visit. If a part is no longer available for an old model, we will tell you plainly.

Why is my Remson geyser not heating?

Usually because the heating element has burnt out or the thermal cut-out has tripped. A thermostat that has drifted gives warm rather than hot water. Check the wall switch and MCB first. If power is reaching the geyser and it still stays cold, the technician will test the element, thermostat and cut-out to find which part has failed.

Should I repair or replace an old Remson geyser?

Repair it if the tank is sound and the parts are available. A new element or thermostat is a small job compared with a new geyser. Replace it if water is seeping from the tank body, the hot water is consistently rusty, or a needed part can no longer be found. The technician will give you a straight answer before any work starts.

Request a call back

Leave your number and we will call you

Tell us the appliance, the brand and what it is doing. We call back, explain the likely fault and agree a visit time. The price is agreed before any work starts.

Prefer to talk now?

+91 82740 66348

    We only use your number to call you back about this request.